Greyfin 60W A2 Laser Cutter
£3,500.00 exc VAT
Our best seller the Greyfin A2 Laser Cutter is very popular with schools and shared workspaces. Built into its own wheeled cabinet with a powered Z axis for raising and lowering its cutting bed the Greyfin A2 Laser Cutter is perfect for most workshops and classrooms. Our ready-to-run package includes water pump, air assist and extraction fan so you can be up-and-cutting quickly.
This product includes a CW3000 chiller for tube cooling.
This machine uses a 60W laser tube, replacements are available for £250
This machine comes with an extractor fan for venting externally, we are also able to supply BOFA filtration unit at cost, should they be required. BOFA recommends the AD Oracle IQ for use with this laser cutter.
600mm x 400mm cutting area
The laser cutting area holds a sheet of A2 card. 1,360mm x 880mm x 1,070mm machine size The Greyfin will fit through double doors and is a good compact size. Connectors for air assistance and water cooling are to the right side of the machine with extraction at the rear.
60W laser tube
The 1200mm long laser tube produces a peak output of 80W and 60W of continuous cutting. It will typically cut through 3mm birch laser ply at 20mm/s. The tube should last for around 1200 hours and comes with a 3 month warranty.
Lasercut 5.3 Controller
The laser uses the Lasercut software package from Leetro automation. It is capable of importing dxf files such as those created by 2D design and Adobe Illustrator.
100mW Red dot alignment
The red visible laser dot is particularly helpful if you want to squeeze large items onto the sheet material or to realign the work after removing it from the laser cutter.
The Greyfin A2 Laser Cutter stands on it's own putting the working area of the machine at a sensible height. The lockable wheels allow you to move the Greyfin for easy access behind the machine for maintenance. It has 4 adjustable height feet which maybe used to compensate for floor level or to adjust the working area height.
Vaporised material can leave significant staining on the work piece, the extractor fan draws the smoke out of the machine and away from the work in progress. All our machines come complete with long flexible tubes and powerful extraction fans.
Air assisted cutting
A 120 L/Min compressor pumps air through a pipe right up to the cutting head. Air assist improves the cutting effectiveness and protects the optics from smoke damage.
This is a closely packed framework of end-on metal sheets. The dense arrangements supports all the work while cutting small items, the end on style reduces the number of laser reflections that may mark the underside of your work. They are also useful when sheet materials need to be held flat with magnets.
Is made of vertical slats which support large pieces of work during cutting, the vertical arrangement limits the number of laser reflections that burn the underside of the work.
A row of LED’s under the X-axis provides bright and even illumination of the work piece during cutting.
|Maximum cutting area:||600 x 400mm|
|Body dimensions:||1,360 x 880 x 1,070mm|
|Power source:||AC 110 – 220V ± 10%, 50 – 60Hz|
|Total power:||<1,000 W|
|Operating temperature:||0 – 45 °C|
|Humidity:||5 – 95%|